dos4gw
Freshman driver
Posts: 17
|
Post by dos4gw on Aug 30, 2006 3:13:25 GMT 1
|
|
|
|
Post by joker on Aug 30, 2006 23:49:30 GMT 1
I shall have an attempt at doing this car for you dos  Might not be straight away because it's been a while since doing any Photoshop and Forza together I'll keep you upto speed on progress at regular intervals |
|
|
|
Post by Jake242 on Aug 31, 2006 2:12:24 GMT 1
I gave dos a decals.bin with all the vinyls needed in it.......to make the safety car
your welcome to do it still joker but I don't think dos needs one done anymore
|
|
|
|
Post by joker on Aug 31, 2006 9:54:42 GMT 1
Oh!!  Nevermind then if Dos still requires one to be made then I shall proceed with creating the Merc, if not then it's saves me the time and effort........BONUS!!! ;D ;D ;D Thanks for your response though Jake |
|
dos4gw
Freshman driver
Posts: 17
|
Post by dos4gw on Aug 31, 2006 23:42:33 GMT 1
No worries Joker, I can manage with the bin file Jake sent me. A quickie though; what's the best way to mirror a vinyl?
I must mirror the F1 logo on the right side of the car, but tilting it proves hard.
|
|
|
|
Post by Jake242 on Sept 1, 2006 6:06:55 GMT 1
lets say it starts with 200 x 200 just put it to like -200 x 200 or 200 x -200(depending on what way you wanna mirror it
then it mirrors it
Jake~
|
|
|
|
Post by joker on Sept 1, 2006 11:47:05 GMT 1
No worries Joker, I can manage with the bin file Jake sent me. A quickie though; what's the best way to mirror a vinyl? I must mirror the F1 logo on the right side of the car, but tilting it proves hard. When I first began producing custom cars I used to use the tilt function to mirror my decals, proves very awkward. I then started trying the way jake describes and found it works correctly and is pretty easy to do. Only trouble with decal mode is that some cars don't line up correctly from one side to the other which means painstakingly switching from side to side and altering the positions of decals. Hopefully this will get fixed for FM2 |
|
